Sintered AlNiCo magnets are manufactured by powder metallurgy technology which similar with other sintered magnets.焼結アルニコ磁石は、他の焼結磁石と同様の粉末冶金技術によって製造されています。 Its overall magnetic performance is slightly low thanその全体的な磁気性能は、 アルニコ磁石をキャスト, thus not commonly used like the latter.したがって、後者のように一般的には使用されません。 Sintered AlNiCo magnets are well adapted for small-sized, thin, light, and焼結AlNiCo磁石は、小型、薄型、軽量、および 複雑な形状の磁石。 Beside high dimensional accuracy and tight tolerance.高い寸法精度と厳しい公差に加えて。 It also has superior mechanical strength and machinability.また、優れた機械的強度と被削性を備えています。 Viewing from the production, sintered AlNiCo magnets have higher utilization ratio of material, lower生産から見ると、焼結アルニコ磁石は材料の利用率が高く、材料の利用率が低い 組成の分離 鋳造されたアルニコ磁石と比較した磁気性能の変動。
焼結アルニコ磁石の製造工程
焼結AlNiCo磁石の磁気特性
グレード | 残留磁気 Br | 飽和保磁力 HCB | マックス。 エネルギー製品 (BH)maxの | 温度。 係数 Tk | キュリー温度。 | マックス。 動作温度 | MMPA相当 | ||||
mT | Gs | kAの/メートル | Oe | kJの/メートル3 | MGOe | %/℃ (BR) | %/℃ (Hcjは) | ℃ | ℃ | ||
FLN8 | 500 | 5000 | 40 | 500 | 9 | 1.13 | -0.02 | -0.03 | 760 | 450 | アルニコ3 |
FLNG12 | 700 | 7000 | 48 | 600 | 12.4 | 1.55 | -0.02 | -0.03 | 810 | 450 | アルニコ2 |
FLNGT18 | 600 | 6000 | 90 | 1130 | 18 | 2.2 | -0.02 | -0.03 | 860 | 450 | アルニコ7 |
FLNG34 | 1200 | 12000 | 48 | 600 | 34 | 4.25 | -0.02 | -0.03 | 890 | 450 | アルニコ5 |
FLNG37 | 1250 | 12500 | 48 | 600 | 37 | 4.63 | -0.02 | -0.03 | 890 | 450 | アルニコ5 |
FLNGT28 | 1050 | 10500 | 60 | 600 | 28 | 3.5 | -0.02 | -0.03 | 850 | 450 | アルニコ6 |
FLNGT38 | 800 | 8000 | 120 | 1500 | 38 | 4.75 | -0.02 | -0.03 | 850 | 450 | アルニコ8 |
FLNGT42 | 880 | 8800 | 120 | 1500 | 42 | 5.25 | -0.02 | -0.03 | 820 | 450 | アルニコ8 |
FLNGT36J | 700 | 7000 | 140 | 1750 | 33 | 4.13 | -0.02 | -0.03 | 850 | 450 | アルニコ8HC |
|